SCREWED FLANGES
SCREWED FLANGES SUPPLIER IN INDIA, SREWED FLANGES MANUFACTURER IN MUMBAI, SCREWED FLANGES SUPPLIER IN MUMBAI, SCREWED FLANGES STOCKIST IN MUMBAI, SCREWED FLANGES MANUFACTURER IN INDIA, SCREWED FLANGES STOCKIST IN INDIA.
SCREWED FLANGES
Producing, distributing, and storing commodities are all done by Rajendra Industrial Corporation. Pipe flanges known as screwed flanges are employed in numerous industrial applications. These are a kind of pipe flange that may be attached to the pipe without using solder. Screwed flanges have inner threads that match the outer thread on the pipe. The Screwed flange arrangement is most frequently employed in piping systems with diameters less than 4 inches, despite the fact that it is available in a wide variety of sizes and pressure ratings. Non-toxic, low-pressure, and low-temperature applications are among of its typical usage. Screwed flanges between 1/2 and 2 inches in diameter are much more prevalent than those bigger than that.
Additionally, we stock Stainless Steel Screwed Flanges. As a top manufacturer of stainless steel Screwed flanges, we offer these flanges in a variety of stainless steel varieties. Grades 304, 316, and duplex are some of the materials used for flange operations most frequently.
SPECIFICATION CHART OF SCREWED FLANGES
|
Size |
1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000 |
|
Standards |
ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
|
Pressure Rating ANSI |
Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 |
|
Pressure Calculation in DIN |
6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
|
UNI |
6Bar 10Bar 16Bar 25Bar 40Bar |
|
EN |
6Bar 10Bar 16Bar 25Bar 40Bar |
|
Coating |
Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized |
|
Test Certificates |
EN 10204/3.1B |
|
Production Technique |
Forged, Heat treated and machined |
|
Connect Type/ Flange Face Type |
Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF) |
|
Special design |
As per your drawing AS, ANSI, BS, DIN and JIS |
|
Test |
Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
|
Equipment |
Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
|
Material |
Brass Screwed Flange, Titanium Screwed Flange, Incoloy Screwed Flange, Nickel Alloy Screwed Flange, Super Duplex Screwed Flange, Monel Screwed Flange, Duplex Steel Screwed Flange, Copper Nickel Screwed Flange, Inconel Screwed Flange, Stainless Steel Screwed Flange, SMO 254 Screwed Flange, Hastelloy Screwed Flange, AISI 4130 Screwed Flange, Alloy 20 Screwed Flange. |
|
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
|
• JIS B2220 5K Groove & Tongue Flange • 150 LBSGroove & Tongue Flange• ANSI B16.47 Series Groove & Tongue Flange • EN 1092-1 Type 01 Groove & Tongue Flange • GOST 12820-80 Groove & Tongue Flange • BS 10 Table D Groove & Tongue Flange • 600 LBSGroove & Tongue Flange • 900 LBS Groove & Tongue Flange • 1500 LBS Groove & Tongue Flange
JIS B2220 5K Groove & Tongue Flange
150 LBS Groove & Tongue Flanges
ANSI B16.47 Series A Groove & Tongue Flanges
EN 1092-1 Type 01 Groove & Tongue Flanges
GOST 12820-80 Groove & Tongue Flanges
BS 10 Table D Groove & Tongue Flanges
600 LBS Groove & Tongue Flanges
900 LBS Groove & Tongue Flanges
1500 LBS Groove & Tongue Flanges
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
- Flages
